NAVITEK NT PLUS

R151005

Now includes a touchscreen
Network troubleshooter (copper)
PoE, service detection and port information
Real time display of network traffic
Test storage and PDF reporting
Cable tracing/distance to fault (TDR)
Supports TREND AnyWARE App

£970 excl. VAT

Overview

Kit Contents

1 x NaviTEK NT Plus test unit with touchscreen, 1 x remote unit No. 1, 1 x rechargeable power module 1 x PSU EU/UK/US adapters, 2 x patch cables – 30cm, Cat. 5e STP, USB Wi-Fi adapter, 1 x quick reference guide, 1 x carry case

Features

Includes everything in the NaviTEK NT above as well as the following:

  • Now includes a touchscreen
  • Custom wiremap
  • Autotest button performs a suite of network tests
  • Network Probe provides detailed port and network information of each device
  • Port identification using EDP/CDP/LLDP protocols
  • VLAN detection and support
  • Network scan
  • Traffic utilisation bar graph
  • Internal memory for 5000 test reports
  • Generate test reports (PDF or CSV)
  • Send test reports from your mobile device using the free TREND AnyWARE App

Brochures

Product features

Test Mode Selection

A test mode selection is shown on the start screen allowing users to easily choose between Auto-detect, Cable, Switch and Network. Also in instances where switches are configured to deny any unapproved devices, the NaviTEK NT will now display LLDP/CDP port information when connected due to its passive testing mode.

Fibre Cabling Pass/Fail

The NaviTEK NT will indicate a Pass or Fail when testing fibre cabling. Clear colour coded on screen indications of Pass (Green) and Fail (Red) help technicians judge optical Rx power level more easily, as well as eliminating any guess work for technicians with limited knowledge of optical levels. The Pass/Fail threshold simply needs to be defined by the user in Setup from the main network test screen.

Port & network summary info

Press the Autotest button to display summary information and allow for detailed inspection of network parameters.

VLAN detection & operation

Automatic detection of VLAN ID’s allows the user to configure NaviTEK NT for operation on a VLAN.

Ethernet utilisation

Real time display of broadcast network traffic shown as a percentage of port speed for the previous 60 minutes.

CDP/LLDP/EDP port information

Show port information using Cisco Discovery Protocol (CDP), Link Layer Discovery Protocol (LLDP) and Extreme Discovery Protocol (EDP).

Netscan

Display list of IP and MAC addresses of every device connected to the network.

Network Probe

View network illustration to verify test results of each network component.

Today, network technicians have a broad selection of software troubleshooting tools at their disposal and whilst useful in certain situations and environments they do have limitations. NaviTEK NT on the other hand offers a comprehensive suite of test and troubleshooting functionality only found on dedicated hand-held testers:-

Copper and fibre test interfaces
Fast detection of link and IP information including duplex, speed, port ID, VLAN, DNS, DHCP, Gateway status and IP address
Detects services such as ISDN, POTS and PoE
Accurate wire mapping including length measurement and distance to fault
Rugged, compact design permits use in confined spaces
Not susceptible to virus and malware attack

Downloads

Manuals, Software, Brochures

Download and view the latest manuals, quick reference guides, firmware and software updates, and approvals. Registration is required.

View manuals & softwareBrochures

OUR PROMISE

Lifetime Support Promise – we’ll calibrate and repair the testing equipment you buy from us for as long as you use it.*

Depend On Our Data – TREND AnyWARE Cloud is the only system for certification, network and bandwidth testing.

Rapid Service – If we can’t answer your Technical Support call instantly we strive to return the call within 2 business hours.*