Free Shipping Product highlights
FiberTEK III single mode (1310/1550nm) kit with laser light sources for single mode fibre.
Compatible with all LanTEK II and LanTEK III models.
Kit Content
Includes two single-mode FiberTEK III modules, lockable semi-rigid carrying case, SC, FC, ST adapters for modules (2 ea.), SC-SC patch cords, 6 x 9ฮผm SMF compliant to ISO/IEC 14763-3 standard, quick reference guide.
Key features
Setup Wizard
Select field calibration (1-Jumper|3-Jumper) and measurement modes (Loopback|Normal), (Uni-Directional|Bi-Directional)
Auto-test
Perform auto-tests using the intuitive graphical interface to reduce mistakes and ensure accurate certification results.
Review Results
Tier 1 certification results display:
ISO/TIA/IEEE test standard
Pass/Fail result
dB loss of each fibre at each wavelength
dB loss in each direction (when testing bi-directionally)
Fiber link length
dB margin / headroom The main applications for FiberTEK III is the testing of fiber optic MM and SM cabling in LAN and campus applications. Its key feature is to measure attenuation and length of a fiber optic link. (also known as โTier 1 Certificationโ). The test can be carried out during installation as well as during fault finding:
Certifying cable performance to ISO 11801 and TIA 568-C standards
Meet cabling specifications as required by engineers, designers and clients
Provide proof of good workmanship when the client does not require certification tests
Avoid call-backs by identifying faults while onsite
Convert warranty call-backs into chargeable service calls
Dispute resolution between network equipment/configuration versus cable installation
Installation of:
building backbone cabling (โsecondary cablingโ)
inter building cabling and campus cabling (primary cabling)
FTTD (Fibre To The Desk) cabling (โtertiary cablingโ)
Cabling for building automation
Cabling for industrial automation
SAT cabling
Setup Wizard
Select field calibration (1-Jumper|3-Jumper) and measurement modes (Loopback|Normal), (Uni-Directional|Bi-Directional)
Auto-test
Perform auto-tests using the intuitive graphical interface to reduce mistakes and ensure accurate certification results.
Review Results
Tier 1 certification results display:
ISO/TIA/IEEE test standard
Pass/Fail result
dB loss of each fibre at each wavelength
dB loss in each direction (when testing bi-directionally)
Fiber link length
dB margin / headroom The main applications for FiberTEK III is the testing of fiber optic MM and SM cabling in LAN and campus applications. Its key feature is to measure attenuation and length of a fiber optic link. (also known as โTier 1 Certificationโ). The test can be carried out during installation as well as during fault finding:
Certifying cable performance to ISO 11801 and TIA 568-C standards
Meet cabling specifications as required by engineers, designers and clients
Provide proof of good workmanship when the client does not require certification tests
Avoid call-backs by identifying faults while onsite
Convert warranty call-backs into chargeable service calls
Dispute resolution between network equipment/configuration versus cable installation
Installation of:
building backbone cabling (โsecondary cablingโ)
inter building cabling and campus cabling (primary cabling)
FTTD (Fibre To The Desk) cabling (โtertiary cablingโ)
Cabling for building automation
Cabling for industrial automation
SAT cabling
Customer reviews
There are no reviews yet. Be the first one to write one.
