Copper Data Cable Tester

  • Tone And Probe

    The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation. It allows for pin point identification even in the most congested cable bundles. Our unit can be used with any tone generator.
  • LINKMASTER CABLE TESTER

    The LinkMaster™ Tester consists of two units. The main unit is connected to one end of the cable to be tested and the remote unit is connected to the jack at the far end of the cable.
  • TRACETONE® TESTER

    TRACETone™ Tone Generator and Amplified Probe test set...
  • TONE GENERATOR

    Tone Generator for Data Cable Tracing
  • AMPLIFIER PROBE

    Amplifier Probe for Data Cable Tracing
  • TONE & PROBE KIT

    Tone and Probe Kit for Data Cable Tracing
  • VDV II Cable Verifier

    1 x VDV II, 1 x dual port remote unit, 1 x coax remote unit, 1 x alkaline battery, 1 x multi-language user guide.
  • VDV II PLUS

    1 x VDV II Plus, 1 x dual port remote unit, 1 x coax remote unit, 1 x alkaline battery, 1 x multi-language user guide...
  • VDV II PRO

    1 x VDV II Pro, 1 x dual port remote unit, 1 x coax remote unit, 1 x alkaline battery, 1 x multi-language user guide...
  • VDV-II-Series

    VDV II Series

    The VDV II Series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling.
  • SIGNALTEK CT

    If you install or maintain data cabling, SignalTEK® CT allows you to generate PDF test reports that prove installed links run at Gigabit Ethernet transmission rates.
  • LanTEK III Series

    Data cable certifier, LanTEK III, is used for the certification of twisted pair, coax and fibre optic data cables to ensure compliance with TIA and ISO standards.
  • LanTEK III-500MHz – TRADE IN

    Trade-In of any CAT5 (and higher) cable certifier to a LanTEK III-500MHz. 500 MHz cable certifier for TIA/EIA category 6A / ISO class EA including Permanent Link adapters.
  • LANTEK III-500MHZ (EXCL. PL ADAPTERS)

    LanTEK® III-500. 500 MHz cable certifier for TIA/EIA category 6A / ISO class EA excluding Permanent Link adapters. Test adapters to be ordered separately...
  • LANTEK III-500MHZ (INC. LINK ADAPTERS)

    LanTEK III-500. 500 MHz cable certifier for TIA/EIA category 6A / ISO class EA including Permanent Link adapters...
  • LanTEK IV trend networks discount

    LanTEK IV Series

    Data cable certifier, LanTEK IV, is used for the certification of twisted pair, coax and fibre optic data cables to ensure compliance with TIA and ISO standards.
  • LanTEK IV-500MHz -TRADE IN (with PL adapters)

    Trade-In of any Cat5e (or higher) cable certifier to a LanTEK IV 500MHz
  • LanTEK IV-500MHz (with PL adapters)

    LanTEK IV-500MHz Cable Certifier. TIA Category 6A/ ISO Class EA. LanTEK IV Display/Remote handsets, Li-ion Battery (2)
  • LanTEK IV-3000MHz -TRADE IN (with PL adapters)

    Trade-In of any CAT5 (and higher) cable certifier to a LanTEK III-1000MHz. 1000 MHz cable certifier for TIA/EIA category 7/7A
  • LanTEK IV-3000MHz (with PL adapters)

    LanTEK IV-3000MHz Cable Certifier. TIA Category 8/ ISO Class I/II. LanTEK IV Display/Remote handsets, Li-ion Battery (2)