Simpler circuit tracing for network installers with SureTrace®

For many network and data cable installers, tracing UTP cables often relies upon trial and error and can be disruptive, as well as costly in terms of labour and customer downtime.  To streamline and simplify this task, the SureTrace® Circuit Tracer from IDEAL Industries can be used alongside IDEAL Networks testers.

“This SureTrace Circuit Tracer is truly innovative, allowing installers to trace Cat 5e and Cat 6 data cables in a live rack, without disconnecting the cables from the system,” explains Tim Widdershoven, Global Marketing Manager at IDEAL Networks. “This avoids downtime as the installer does not need to interrupt the supply and data signals on the cable to do the trace.”

To trace a UTP cable, a network or data cable installer simply needs to plug the inductive clamp into the battery pack and clamp this over the UTP cable being traced.  The battery pack is then hung on the rack using a magnetic strap. Once the unit is turned on and receiving a strong signal, the installer can then go to the rack where the other end of the cable is and slowly scan the area with the receiver.  The cable can then be easily identified as it will be emitting the strongest signal.

“To ensure efficient installation, maintenance and troubleshooting, this unique circuit tracer is an essential piece of kit for all network and data cable installers, perfect to use alongside IDEAL Networks testers,” concludes Tim.

For more information on the SureTrace Circuit Tracer visit www.idealcircuit-tracer.com.

For further information about IDEAL’s full range of products, visit www.idealindustries.co.uk or www.idealnetworks.net.