{"id":28802,"date":"2019-03-26T15:04:29","date_gmt":"2019-04-26T15:02:47","guid":{"rendered":"https:\/\/www.trend-networks.com\/?post_type=product&p=28802"},"modified":"2021-04-29T15:01:24","modified_gmt":"2021-04-29T14:01:24","slug":"unipro-mgig1-series","status":"publish","type":"product","link":"https:\/\/www.trend-networks.com\/au\/product\/unipro-mgig1-series\/","title":{"rendered":"UniPRO MGig1 Series"},"content":{"rendered":"

Reduce configuration time with independent set-up parameters (devices, services and tests)<\/b><\/p>\n

\n

Unlike a typical Ethernet transmission tester, where the configuration of target devices, services and type of tests are mixed together, the UniPRO MGig1 separates them into 3 easy to manage independent processes.<\/p>\n

One touch to run multiple tests – unattended<\/b>Single button Autotest is an automatic sequence test function that executes user defined multi test items for specific applications (such as radio link installation)The most cost-effective RFC2544\/Y.1564 tester in the market<\/b><\/p>\n

UniPRO MGig1 performs Bi-Directional or loop back testing of Y.1564 and RFC2544 including\u00a0 a jitter sub test with an-easy to understand pass\/fail curve.<\/p>\n

Bi-Directional CIR (committed information rate), EIR (excess information rate) and policing tests with colour identification makes the Ethernet link test a better real-world simulation of multi-stream network traffic compared to RFC2544.<\/p>\n<\/div>\n

\"\"<\/p>\n

 <\/p>\n

<\/p>\n

SLA-Tick (Service Level Agreement)<\/b><\/p>\n

UniPRO MGig1 tests the actual bandwidth and performance compared to the agreed service levels from the service provider significantly faster than RFC2544 and Y.1564 testing. The SLA-Tick test simultaneously performs multi service (stream) information rate, frame loss, jitter, delay and service disruption time (SDT) into a single operation.<\/p>\n

Bit Error Rate Test (BERT)<\/b><\/p>\n

BERT tests the Ethernet frame payload from layer 1 to layer 4 in Ethernet links and compares the error ratio or error bit count to pre-defined limits ensuring error free transmission at the specified bandwidth<\/p>\n

Multi Service (Stream) test<\/b><\/p>\n

Up to eight service parameters measured simultaneously on SLA-Tick and Y.1564 (NetSAM) tests. Enables service priority check over the network such as video, data and VoIP as well as 3G\/4G mobile backhaul link test.<\/p>\n

Multiple levels of VLAN (QinQ) and MPLS<\/b><\/p>\n

Allows up to eight levels of VLAN within VLAN nesting for RFC2544, Y.1564 (NetSAM), BERT and SLA-Tick testing. For links using MPLS, UniPRO MGig1 PRO can test up to three levels with label, class and TTL for each service<\/p>\n

Comprehensive in-line network monitoring<\/b><\/p>\n

Measures total incoming and outgoing bandwidth consumption.<\/p>\n

It measures top ten band-width users sorted by source and destination address (IP or MAC address) or up to three levels of VLAN ID (VLAN tag).<\/p>\n

PoE\/PoE+ testing monitors power consumed by a device and performs load testing to determine maximum amount of power available at a port.<\/p>\n

Monitoring statistics include: multi cast, uni cast, broad cast, frame size, frame error count (FCS errors), network utilisation and LLDP protocol detection<\/p>\n

Simultaneous IPv4 and IPv6 support<\/b><\/p>\n

Supports both IPv4 and IPv6 internet addresses to future-proof the investment in UniPRO MGig1<\/p>\n

UniPRO MGig1 model:<\/span><\/p>\n

Entry level model for first line users. TREND for radio link installers, fixed link installers, subcontractors, network maintenance professionals and system integrators.<\/p>\n

UniPRO MGig1 Plus model:<\/span><\/p>\n

TREND for field engineers who want the ability to augment pre-configured and auto sequence tests with the ability to dig deeper into the troubleshooting of unsatisfactory test results – or who wish to do detailed manual testing.<\/p>\n

UniPRO MGig1 Pro model:<\/span><\/p>\n

Full ITU-T Y.1564 (NetSAM) multi service (stream) testing capability. Retains the simplicity of use, intuitive graphic interface and time saving pre-configured and single button auto sequence testing functions. Adds the independent target and service to cut troubleshooting time.<\/p>\n

UniPRO SEL1:<\/span><\/p>\n

A self contained intelligent loopback device to accompany any of the UniPRO MGig1 units to enable loopback at the distant end of the link.<\/p>\n

Application<\/strong><\/p>\n